Coming soon from Sequentix, the long-awaited replacement for the P3 sequencer...
Cirklon is a totally new hardware sequencer design, with software based on the P3, but greatly improved
both in usability and internal operation.
The user-interface is based around a 240x64 pixel graphic LED display, 19 rotary encoders with push-switches, 2 assignable knobs, 35 high-quality Cherry keys with integrated LEDs, and a further 35 tri-colour status LEDs.
Cirklon has 16 tracks, with 5 independent MIDI INs and OUTs to connect a large number of
controllers and synths/sound modules while keeping MIDI latency to a minimum.
There will also be USB MIDI, native CV/gate support, and a dedicated DIN sync output.
The 32-bit, 72MHz ARM Cortex CPU runs a proprietary sequencer engine to ensure optimum timing
accuracy.
All MIDI ports are provided by hardware serial ports in the CPU core itself.
The CV/gate connectivity will be available in two levels - a pair of 12-bit resolution CV and gate outputs,
or an external CV breakout box with a large number of CV outs (details to be finalised).
Pattern storage is comprised of 2MB battery-backed internal RAM and 512MB internal NAND flash, with a SD/MMC card socket for data backup.
Cirklon is currently still in the pre-production phase.
There were a couple of late issues to resolve on the first board run, but those are sorted now.
We are currently working out the final details for the production enclosure, and we'll be ready to do a factory run.
Price is expected to be under 1000 ukp.
Obviously this one is not in a final enclosure...
 |
 |
|
 |
||
The production enclosure will allow for desktop or rackmount use through the fitting of the I/O panel on the rear or bottom of the chassis, as shown here:
